Whole House Furnace Humidifier Filters

Search For Whole House Furnace Humidifier Filters @ Amazon.com

A whole house humidifier or furnace mounted whole house humidifier is just another example of an exceedingly neglected element of our house – on top of a brick chimney, an attic, and a crawlspace, which fall into the same basket.

If you’re not going to maintain it, it’s in all probability a bad idea to get a whole house humidifier. Since it is attached to a forced air heating scheme that constantly circulates air allround the house, poor maintenance may give rise to environs attracting mold growth and support reproduce of dust mites.

Properly operating and preserving a whole house humidifier helps us relieve a great deal of physical discomforts affiliated with cold / arid weather, including respiratory difficulties and arid skin and lips. It also lowers or wholly does away with static electricity, cosmetic wall trim separations, cracks in finishes, separating hardwood floor boards, etc. The trick is to remainder the amount of moisture in your home at such a level which will gain your health, living environment, and save energy rather of creating conditions which most times cause mold or other biological organism growth (excessive moisture could do that). And for proper humidity balancing, you either have to detect and monitor your environment, or buy an electronic device which will do it for you. In general, the humidity in your house must not exceed 50% (35% – 50% is the most comfortable). Higher levels will normally develop condensation on windows, on occasion on walls and ceiling surfaces, or possible mold and mildew growth.

No matter how modern the whole house humidifier system installed on your property is – it will require regular maintenance because it won’t work decently or at all without it. The truth is – I seldom see one the right way maintained or even operating at all.

There are fundamentally 5 types of whole house humidifiers:

Flow-Through (bypass) Whole House Humidifiers (passive and fan assisted) – they use a so-called water pad made out of foam, expanded aluminum, and some other materials. The water drips on top of the square pad and the air from the heating system flowing through the pad picks up the water molecules and carries them through the air ducts and around the house. The remaining water (whatever wasn’t picked up by the air) drains through the base of the whole house humidifier.

A whole house humidifier’s water pad has to be substituted once a year before each cold season to carry out expeditiously and to prevent mold growth. For the homes utilizing private well or other roots with high levels of minerals, cleaning might be required more often.

For each gallon of water evaporated into humidity, Whole House Flow-Through Humidifiers waste among 5-8 gallons down the drain.

Drum Whole House Humidifiers – they have a drum shaped rotating frame (powered by a small, low voltage motor) and a foam or fabric sleeve pulled over it. The bottom section of the drum is always submerged in water which keeps the rotating foam / fabric moist and allows air flowing through the drum to pick up that moisture. The foam / fabric and the water in a little reservoir beneath the drum require regular maintenance! If you leave that water standing in an unused humidifier (for example for the duration of the summer), and then just start out the whole house humidifier unit without cleaning it first, I guarantee that you’ll be spreading mold spores through the entire house.

Wick Type Whole House Humidifiers – collected out of a little reservoir and a filter (wick) that absorbs water from it. The entire humidifier is mounted inside the air duct, and in order to inspect it, you have to unscrew the cover plate and remove the entire unit – I don’t commended it, is cheap and easy to install, but that’s all.

Spray Mist Whole House Humidifiers - as the name suggests, they spray water mist into the air duct and the mist is picked up by the flow through the air duct. Don’t even consider this type if your house’s water supply is a private or community well – it will taint the spray head immediately. Those are one of the most inexpensive and easiest to install types out of all the whole house humidifiers.

Steam Whole House Humidifiers – being the most costly to buy / install and not that cheap to operate, it comprises of innovative technology and perplexed designs. Steam whole house humidifier might operate with or independently from your system heat cycle. Whenever the humidity drops beneath the setting, they will activate your furnace blower and get the humidity to the right level independently from the thermostat settings. One of the known difficultnesses related with this type of the whole house humidifier is that the water disseminated with cold air (with operating furnace blower only / no heat) does not wholly evaporate. Condensing on the air duct cold walls might once in a while cause bacteria and mold growth. If you like new widgets and don’t mind spending a great deal of severe cash for it – go in front – but it sill does require maintenance.

One more type of a Flow – Through type humidifier but this time almost 100% effective (as claimed by the manufacturer).

Rotary Disc Furnace Mount Whole House Humidifier by Desert Spring: To be honorable with you, I can’t say much regarding it except for relaying selective information from the manufacturer’s website, forums, and discussion boards. It sounds outstanding because it is (as claimed by the manufacturer)

the most effective furnace-mount humidifier on the market
100% effective – 1:1 conversion of water to humidity
uses only 4 Watts/hr of energy
drain-less system – there’s no need for a drain in your utility room / furnace emplacement area
very little maintenance with Auto-Flush accessory (you may do it manually each few days, depending on usage, solid homogeneous inorgani substances would only need to be got rid of each month or two in most regions of North America)
never needs filters or pads alternate – uses self cleaning polycarbonate discs (non-absorbent plastic)

As with each product, there are those who love it and hate it.

Whole House Humidifier Maintenance:

Check your humidifier unit visually on a regular basis (it’s hard to do not forget it peculiarly if your whole house humidifier has been mounted in the crawlspace or attic area)
Make sure that there’s no water dripping from the whole house humidifier itself and any of it is constituents (water supply line, drain line, shutoff valve, enclosure, area under the unit, or furnace itself)
Replace the whole house humidifier water pad / evaporator pad / filter / foam on seasonal basis (or more often times if required). Make sure that you re-assemble everything in the right way to prevent water leaks
Clean the whole house humidifier elements contaminated with solid homogeneous inorgani substance deposits after the heating season ends – it will be much requiring little effort to do it when everything is still wet and soft. You may use 50/50 vinegar-water solution for heavier contaminated components. Just soak them for 15-30 minutes (or longer if necessary) and that will have to aid with cleaning.